As an Amazon Associate I earn from qualifying purchases.
1. Art Deco Emporium
Art Deco Emporium LHE27-RP0-WHT Edison Screw E27 Bulb Holder in White for Lamp or Pendant Use Supplied with Shade Ring and Flex GripArt Deco Emporium
- E27 edison Screw bulb fitting. 10mm threaded entry. Supplied with cord grip for pendant use. Suitable for lamps and/or pendants. WhiteThermoplastic.
Linkind 2-Pack Metal Pendant Light Fitting White, E27 Lamp Holder for Ceiling Pendant Light, Ceiling Fitting Set with 100cm CableLinkind
- Follow the four steps on the manual, finish the installation within minutes. Bulb type: fits for es e27 edison screw light bulbsbulbs not included with a holder diameter of 4 cm, Voltage: 220-240 Volts.
Easy to be integrated with the decorations of your room. Adjustable length: 100 cm sturdy long lamp cable. Ideal for bar, living room, Coffee Shop, Corridor, Dining Room, Kitchen Use.
Package include: 2x pendant Fitting, 1x Instruction Manual, 1x Screw Pack. Note: only for open bulb style, max wattage: 60W, NO LOCK RING available to attach a lampshade. Simply loosen the cable gland at top and push the cable into the ceiling rose can shorten the length to your preferred one.
Ce certified: reliable and safe to use. Easy installation: screw rail and screws are included to attach the light fixture to the ceiling. Ideal to diy your style: 2-pack- the white metal ceiling rose and pendant holder set comes with a modern minimalist style.
No Bulb, Flexible Clamp Lamp Base E27 with Switch & Cable, Clip on Bed Light Bulb Holder E27 with UK Plug, Clip on Lamp Holder Edison Screw for Headboard/Office Desk/Craft Table/Aquarium WhiteAkynite
- Clip-on bulb holder is ideal for aquarium lighting. Do not use incandescent lamp and heating lamp such as uva, vintage, you can choose from modern, UVB! Overheating of the bulb will melt the lamp holder! Light bulb E27 can be found everywhere, fashion style to meet your liking. Lamp holder with clamp: the metal clip is robust with a strong grip, drawing board.
Please note this E27 lamp holder with switch does not support dimmable bulb. The 38 cm aluminum neck can rotate 360 degrees, good for direct light and positional light. Precautions for use: the light bulb holder with clip is compatible with e27 screw led bulb up to 60W.
Flexible 360 degrees: e27 lamp bulb holder with edison screw fitting, so the height and direction of the light can be flexibly adjusted to always find the ideal position. It can be fixing on music stand, lamp for nails tech/tattoo/makeup/manicure, lamp for watching videos, working lamp, plant lamp, craft table, reading lamp, desk lamp, table lamp, drawing board, and help to provide lighting for your hobbies.
The flexible neck can withstand E27 LED light bulb within 180 grams. Attention: if the light bulb can not work properly, please tighten or loosen the bulb a little so that it is in full contact with the socket. Practical application: the flexible e27 lamp holder with clamp can be used as bedside lamp, etc. White clip on lamp holder with UK mains plug and cable, AC 220V-240V.
White, for Living Room Kitchen, 100W E27 Large Screw Lamp Holder, Ceiling Rose & Light Pendant E27 Bulbs Fitting, DORESshop Ceiling Pendant & Lamp Holder, Set with 120cm Cable and Screw RingDORESshop
- Adjustable lengththe 120cm long bulb cable provides an ideal length for hanging bulbs. Fashion decorationdiy retro interior decoration, restaurants, retro industrial style, classic white simple style make this lamp a decorative element.
Easy to installit is easy to use with your existing E27 bulb, fast and simple, and will not get in the way. Packagingincluding screw fittings, 120 cm long wire, ceiling lamp holder diameter 20 * 100mm, lamp cap diameter 65mm.
Suitable for e27 bulbsfor example, up to 100W, LED bulbs, energy-saving bulbs, Edison bulbs, support the installation of lampshades. It can be used in kitchens, bars, etc. The length of the cable can be adjusted, and the length can be adjusted as needed.
AC 220-250V, E27 Lamp Holder Base, Edison Screw E27 Wall Socket, 4pcs, E27 Screw Light Bulb Socket Holder, WhiteAkynite
- The base is made of flame-retardant material. As the plastic housing is fragile, direct connection to AC 230V. Good for temporary lighting and recessed lighting, bedroom, terrace, balcony, ceiling light, wall lamp, ceiling fan lights. Simple e27 lamp base can help to create lighting effects for bedrooms or special days, you can choose from modern style, such as mini disco.
Fit for purpose: the main part of e27 lamp bulb holder is ceramic, safe and durable. E27 bulbs can be seen everywhere, UV LED. Application: the e27 base holder is a practical fitting for wall/ceiling lighting fixture.
Easy for installation: small size Ø91*53mm, simple wiring, with decent amount of room in the back. The power cord can be well covered, easy and convenient for installation, so be careful not to over tighten the bulb.
The simple e27 lamp base is very suitable for temporary lighting in new buildings. Do not touch the bulb during heating to avoid burns. Compatibility: lamp holder e27 white with screw thread, colorful bulbs, retro style, suitable for e27 spiral led bulb, the maximum power of the bulb is 60W. No earth connector. Screw in type light fitting, high temperature resistant 500℃, garage, dry basement, an inexpensive replacement fitting to be used in a workshop, shed or attic/loft.
|Manufacturer||Warm Lighting Co., Ltd|
|Height||5.3 cm (2.09 Inches)|
|Length||9.1 cm (3.58 Inches)|
|Width||9.1 cm (3.58 Inches)|
|Warranty||A new replacement or refund is available during the 1 year warranty.|
SODIAL E27 Round Plastic Base Screw Light Bulb Lamp Socket Holder WhiteSODIAL
- White round e27 light Bulb Lamp Socket Holder. E27 light Bulb Socket. Round body bottom with screw terminals design. Suitable for a wide variety of fixtures, signs and displays.
White, Light Fitting lamp Holder with Cable Socket and Electricity Pen, 11 PCS E27 Lamp Holder Set, Light Bulb Socket for E27 Lampholder, Edison Light Bulb SocketN\A
- Compatible size- suitable for E27 lamp holder, it is bulbs of E27 specification. Easy to install- when using a bulb connection, correctly connect the wire to the positive and negative poles, connect the wire to the bulb, and then fix it to install it easily.
Reusable- the material of the base of the lamp holder is durable, not easy to damage, not easy to clean, and can be moved and replaced at will without waste.
What you will get- if you buy our e27 lamp holder set, you will get 10 white lamp holders with wires and connected terminals, and 1 electric tester, which is enough to meet your needs. High-quality materials- the base of the lamp holder is made of high-quality and safe plastic material, which is strong, insulated, and has the functions of preventing electric shock, heat-resistant, corrosion-resistant, dust.
White Ceiling Rose Retro Modern Pendant Light Fitting,E27 Lamp Holder with 100mm Cable for Hanging Flexible Ceiling Light Accessories-2pack White08COZZY
- Cable length: 100cm can be adjust, metal lamp holder cover with diameter:4. 2cm, max wattage: 60 watts, white Metal ceiling cover, Voltage: 240 Volts. Design your own stylish ceiling light with a nice decorative bulb.
Ideal for an open bulb style/ any e27 lamp shade, fits for 60W ES E27 Edison Screw light bulbs, LED light bulbsbulbs not include. Modern ceiling rose / light pendant light fitting, High Quality white ceiling cover and lamp holder with 100mm white cable for hanging flexiable ceiling light accessories, Excellent Value products.
With safe earth wire connection on the metal ceiling roseclass I, the lamp holder is perfect fitting a lampshade with 4. 2cm-4. 5cm hole. Easy for fit with your existed lamp shade, bedroom, this is a good ideal for corridor, dining room and kitchens.
8 Pack Lamp Shade Reducer Ring Converter E27 for Lamp Holder Twist Plastic Lampshade Fitting Washer Adapter Ring Inner 38mm WhiteRobell
- Feel free to contact us if you have any questions. Material: the lampshade reducing ring adapter is made of hard ABS plastic, with sufficient hardness, not easy to deform, and durable.
Function: e27 lampshade reducer adapts to lampshades made in Europe, by turning the reduction ring to fix the bulb and lampshade. Widely used in bedside lamps, table lamps, floor lamps, etc. Note: please check the size before purchasing and whether it is compatible with the lampshade.
Compatibility: the lampshade accessory converter is compatible with most lampshades made in Europe. Specifications: external size: 57mm, height: 9mm, internal size: 38mm, the lampshade adapter ring is compatible with most lampshades made in Europe. Adjust the lamp shade to fit the size of the bulb.