As an Amazon Associate I earn from qualifying purchases.1. MK
MK K1170RPWHI Pendant Lamp Holder with Cord Grip
MK - High gloss finish, scratch & colour fade resistant. Heat resistant to category T2. Ten-year assurance. Model number: k1170RPWHI.
| Brand | MK |
| Manufacturer | Honeywell |
| Part Number | K1170RPWHI |
| Model | K1170RPWHI |
2. Knightsbridge
Knightsbridge Pendant Lamp Holder, White, Urea
Knightsbridge - Bc type lampholder Bayonet. T2 rated 100w incandescent / Max. Certified to bs en 61184, EN 62471. 8w led. Integral cord grip.
3. Tabsy
Bayonet Batten White Ceiling Lamp Holder BC B22 Light Bulb Socket Lamp Fitting
Tabsy - Ideal for confined and awkward places Such as Bathrooms and Cupboards, With Extra Wide Skirt to accommodate Ballast of Energy saving Bulbs. Extra wide skirt to accommodate ballast of energy Saving Bulb Colour: White Power: 250v~ Conforms To Bsen 61184.
Pifco b22 bc batten straight lamp holder Surface Mounting Ideal For Use In Confined Spaces Such As Bathrooms. Ce approved surface mounting.
4. Akynite
E27 Screw Light Bulb Socket Holder, 4pcs, White, AC 220-250V, Edison Screw E27 Wall Socket, E27 Lamp Holder Base
Akynite - Easy for installation: small size Ø91*53mm, simple wiring, with decent amount of room in the back. E27 bulbs can be seen everywhere, you can choose from modern style, suitable for E27 spiral LED bulb, such as mini disco. Do not touch the bulb during heating to avoid burns. Compatibility: lamp holder e27 white with screw thread, retro style, uv led.
As the plastic housing is fragile, easy and convenient for installation, direct connection to AC 230V. Fit for purpose: the main part of e27 lamp bulb holder is ceramic, garage, safe and durable.
Ideal for living room, workshop, loft, pendant light, basement, attic, rear porch, under-stairs cupboard and shed. No earth connector. Note: the mounting screws are not included. The base is made of flame-retardant material. The power cord can be well covered, so be careful not to over tighten the bulb.
Good for temporary lighting and recessed lighting, ceiling light, corridor, terrace, storage room, bedroom, garage, such as night lights, balcony, wall lamp, ceiling fan lights. Application: the e27 base holder is a practical fitting for wall/ceiling lighting fixture. The simple e27 lamp base is very suitable for temporary lighting in new buildings. Screw in type light fitting, an inexpensive replacement fitting to be used in a workshop, high temperature resistant 500℃, dry basement, shed or attic/loft.
| Brand | Akynite |
| Manufacturer | Warm Lighting Co., Ltd |
| Height | 5.3 cm (2.09 Inches) |
| Length | 9.1 cm (3.58 Inches) |
| Width | 9.1 cm (3.58 Inches) |
| Warranty | A new replacement or refund is available during the 1 year warranty. |
5. Status
Status SCRBHB3 Ceiling Rose Battern Lamp Holder, White
Status - No danger of electrocution if there is no lamp in place. A straight batten holder. High quality product. Perfect to use as corridor lamp, ceiling lamp, balcony lamp, etc. Easy access design for all screws and terminals.
| Brand | Status |
| Manufacturer | Status |
| Height | 7.8 cm (3.07 Inches) |
| Length | 13 cm (5.12 Inches) |
| Width | 9.19 cm (3.62 Inches) |
| Part Number | SCRBHB3 |
| Model | SCRBHB3 |
6. MIFIRE
600℃ Heat Resistant Brass, 110-250V, E27 Vintage Light Socket, Industrial Retro Edison Lamp Holder for DIY Pendant Ceiling Lighting
MIFIRE - Lampshades addableusually used with e27 vintage Edison bulbs and for pendant lighting. Just connect the wires correctly to the positive/negative pole and then assemble all the parts together.
Diy funwith antique and industrial appearance, this vintage socket is compatible with E27 medium base bulbs especially Edison series bulb, suitable for decorative DIY pendant lighting projects. Customer satisfaction if you are not satisfied with our Light Sockt, please contact us and get a free replacement or full money back.
We provide 100% with 30-Day Satisfaction Money-Back. Easy to installmade of aluminum, easy to assemble. Safety & heat-resistantbulbs could be held tightly, support 110 - 250V, heat resistant temperature up to 600 °C. This lamp holder can be added with different lampshades and adjustment line lengths to bring a variety of decorative atmosphere.
| Brand | MIFIRE |
| Manufacturer | MIFIRE |
| Height | 4 cm (1.57 Inches) |
| Length | 6 cm (2.36 Inches) |
| Weight | 230 |
| Width | 5 cm (1.97 Inches) |
7. PEBA
Stairs, Hallway, PEBA5 pack, Porcelain Lamp Light Holder, E27 Screw Light Bulb Socket Holder, White Round Plastic Base, E27 Lamp Holder, for Bedroom, Terrace, Ceiling Light Fitting, Living room
PEBA - Applicable occasionswhite ceiling lamp holders can be installed in warehouses, sheds, basements, workshops, garages, storage rooms, attics or other places to provide you with ideal lighting. Suitable for temporary lighting and recessed lighting, wall lights, chandeliers, ceiling lights, such as night lights, ceiling fan lights.
Support 220v-250v rated voltage and 4A rated current. Easy to installthe wall socket is equipped with screws, extension tubes and instruction manuals, allowing you to complete DIY projects in a short time.
Applicatione27 base is a practical accessory for wall/ceiling lighting fixtures.
Widely usede27 fitting ceiling is suitable for all E27 spiral lamps, such as LED bulbs, incandescent lamps, halogen lamps and energy-saving lamps, color bulbs and UV LED. High qualityce-certified peba lamp holder uses ceramic inside, safe and durable; outside uses thick flame-retardant PBT plastic shell, high temperature resistance 500°C, with excellent insulation performance and high safety.
8. DORESshop
Set with 120cm Cable and Screw Ring, for Living Room Kitchen, 100W E27 Large Screw Lamp Holder, White, Ceiling Rose & Light Pendant E27 Bulbs Fitting, DORESshop Ceiling Pendant & Lamp Holder
DORESshop - The length of the cable can be adjusted, and the length can be adjusted as needed. Packagingincluding screw fittings, ceiling lamp holder diameter 20 * 100mm, 120 cm long wire, lamp cap diameter 65mm.
Fashion decorationdiy retro interior decoration, classic white simple style make this lamp a decorative element. It can be used in kitchens, retro industrial style, bars, restaurants, etc.
Easy to installit is easy to use with your existing E27 bulb, fast and simple, and will not get in the way. Suitable for e27 bulbsfor example, up to 100W, energy-saving bulbs, LED bulbs, edison bulbs, support the installation of lampshades. Adjustable lengththe 120cm long bulb cable provides an ideal length for hanging bulbs.
9. nobranded
6-Pack Bakelite Lamp Holder E26/ E27 Light Socket Vintage Bulb Socket ES Screw Lampholder for Ceiling/Pendent/Floor/Hanging Lights, Black
nobranded - Supports rated voltage 250V, rated current 4A. Package includescomes with 6 pieces edison screw lampholders, incandescent, such as LED, suitable for E26/E27 screw in bulbs, halogen and energy-saving lamps.
Easy installationequipped with black cord grip that connects the wires to the positive/negative poles and then assembles all the parts together. Turn the lamp holder in the opposite direction to open it for re-use.
It also makes your home, restaurants, office and courtyard DIY projects safer and more reliable. Vintage designthe screw-in design makes it easier to place the bulb and easily matches any style of decoration, simple and classic.
High qualitythe e27 lamp holder is made of bakelite and is flame retardant, heat resistant up to 180 ° C and corrosion resistant. There is no buckle inside the lamp holder for easy adjustment of the cable. Multi-applicationsuitable for retro décor in homes, bars, etc.
| Brand | nobranded |
| Manufacturer | jujialingshuo |
| Height | 2.4 cm (0.94 Inches) |
| Length | 15 cm (5.91 Inches) |
| Width | 11 cm (4.33 Inches) |
Tabsy - Ideal for confined and awkward places Such as Bathrooms and Cupboards, With Extra Wide Skirt to accommodate Ballast of Energy saving Bulbs. Extra wide skirt to accommodate ballast of energy Saving Bulb Colour: White Power: 250v~ Conforms To Bsen 61184. Pifco b22 bc batten straight lamp holder Surface Mounting Ideal For Use In Confined Spaces Such As Bathrooms. Ce approved surface mounting.
Akynite - Easy for installation: small size Ø91*53mm, simple wiring, with decent amount of room in the back. E27 bulbs can be seen everywhere, you can choose from modern style, suitable for E27 spiral LED bulb, such as mini disco. Do not touch the bulb during heating to avoid burns. Compatibility: lamp holder e27 white with screw thread, retro style, uv led.
Status - No danger of electrocution if there is no lamp in place. A straight batten holder. High quality product. Perfect to use as corridor lamp, ceiling lamp, balcony lamp, etc. Easy access design for all screws and terminals.
MIFIRE - Lampshades addableusually used with e27 vintage Edison bulbs and for pendant lighting. Just connect the wires correctly to the positive/negative pole and then assemble all the parts together.
PEBA - Applicable occasionswhite ceiling lamp holders can be installed in warehouses, sheds, basements, workshops, garages, storage rooms, attics or other places to provide you with ideal lighting. Suitable for temporary lighting and recessed lighting, wall lights, chandeliers, ceiling lights, such as night lights, ceiling fan lights.
DORESshop - The length of the cable can be adjusted, and the length can be adjusted as needed. Packagingincluding screw fittings, ceiling lamp holder diameter 20 * 100mm, 120 cm long wire, lamp cap diameter 65mm.
nobranded - Supports rated voltage 250V, rated current 4A. Package includescomes with 6 pieces edison screw lampholders, incandescent, such as LED, suitable for E26/E27 screw in bulbs, halogen and energy-saving lamps.
