As an Amazon Associate I earn from qualifying purchases.1. Lamps and Lights
Brass, BC, Lamps and Lights Side Entry lampholder
Lamps and Lights - Includes a plastic grommet to prevent flex fraying. Solid brass side entry lampholder with a 1/2 inch male thread at base. Dimensions: w=32mm, h=81mm. Uk made.
2. Art Deco Emporium
B22 Solid Brass Earthed Lamp Bulb Holder with 10mm Threaded Entry
Art Deco Emporium - Grounded with internal screw terminals. All top quality components. Fully ce, uk, european & us regulations compliant. Assembled and tested by trusted UK supplier of vintage lighting. Unique distinctive art deco styling.
| Brand | Art Deco Emporium |
| Manufacturer | Art Deco Emporium Ltd. |
| Height | 3.3 cm (1.3 Inches) |
| Length | 3.6 cm (1.42 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 3.3 cm (1.3 Inches) |
| Part Number | LHB22-R00-BRS |
| Model | LHB22-R00-BRS |
3. ElekTek
ES E27 Batten Lamp Bulb Holder with Plain Skirt Ideal for Vintage Filament Bulbs Antique Brass
ElekTek - Premium product made in the UK. Before installing, switch off electricity at mains. Maximum body diameter 38mm - height fully assembled 54mm - 67mm Diameter base plate with fixing holes on 2" centres BESA - 17mm Diameter aperture to underside.
E27 es 27mm edison Screw cap batten lamp holder. Earth terminal - threaded skirt with 48mm diameter shade ring - Ceramic interior - Brass plunger contacts. This solid brass es e27 27mm edison screw cap lamp holder is intended primarily for attachment to conduit and flat surfaces.
4. ElekTek
Brass Safety Switch Lamp Holder 1/2 inch BC B22 with Shade Ring and Locking Screw in Base
ElekTek - Safety locking screw in base for secure fitting. Safety switch will not operate without a bulb fitted. Solid brass - uk maDE - Premium product. Metal light fittings must be earthed - earth terminals are present.
5. Sunnylinn
White., Switch Lamp Bulb Holder Bayonet B22 Standard Pendant Lamp Socket 10mm Thread Entry Safety BC Light Fitting with Cord Grip for Pendant Lamp, Ceiling 2-Pack
Sunnylinn - High quality & perfect sizeconstructed of fire-resistant materials. The product size is : High 80mm x Wide 40mm. 10mm thread entryplease check the thread size before ordering.
Package & warrantyyou can get 2 pack bayonet cap switch lamp bulb holders. Rated voltage:250V, rated current:2A. Bayonet switch lamp holderb22 bc standard lamp holder with switch, perfect for DIY desk, floor lamp to create a one-of-a-kind fixture for your home.
Our bayonet switched lamp holder is 10mm thread entry with internal cord grip, bayonet b22 standard lamp socket. This product has 35000 hours lifespan, 2 years warranty. On/off cord switchthe lamp holder built in a on/off switch, you can pushed in the button from one side or the other to turn the lamp on/off.
| Brand | Sunnylinn |
| Manufacturer | Sunnylinn |
| Height | 4 cm (1.57 Inches) |
| Length | 8 cm (3.15 Inches) |
| Width | 4 cm (1.57 Inches) |
6. ElekTek
ElekTek Safety Switch Lamp Bulb Holder 10mm Entry BC B22 with Shade Ring and Locking Screw in Base Brass
ElekTek - Please check your thread size before ordering: The female entry thread in the base of this lamp holder is M10 or 10mm. Solid brass - uk maDE - Premium product.
Safety locking screw in base for secure fitting. Metal light fittings must be earthed - earth terminals are present. Switch will not operate without a bulb fitted - also ensure both halves of lamp HOLDER ARE SCREWED TOGETHER PROPERLY.
7. ElekTek
Brass, Safety Switch Lamp Holder Half Inch with Back Plate Cover and Screws
ElekTek - 25mm diameter back plate nipple base plate with 27mm diameter cover and 3 screws. Maximum lamp holder diameter 32mm. B22 22mm bayonet cap with internal earth and locking screw in base.
This solid brass b22 bayonet cap lamp holder is intended primarily for attachment to any solid, flat surface that can be drilled. Mounted height 68mm.
8. ElekTek
Lamp Holder Unswitched Bayonet Cap B22 10mm Entry with Shade Ring Solid Brass
ElekTek - Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring - suitable for bulbs up to 200W.
Maximum assembled, fitted height 48mm. This 22mm bc bayonet connector lamp holder is intended primarily for attachment to a male 10mm threaded connector. All metal light fittings must be earthed.
Lamps and Lights - Includes a plastic grommet to prevent flex fraying. Solid brass side entry lampholder with a 1/2 inch male thread at base. Dimensions: w=32mm, h=81mm. Uk made.
Art Deco Emporium - Grounded with internal screw terminals. All top quality components. Fully ce, uk, european & us regulations compliant. Assembled and tested by trusted UK supplier of vintage lighting. Unique distinctive art deco styling.
ElekTek - Premium product made in the UK. Before installing, switch off electricity at mains. Maximum body diameter 38mm - height fully assembled 54mm - 67mm Diameter base plate with fixing holes on 2" centres BESA - 17mm Diameter aperture to underside. E27 es 27mm edison Screw cap batten lamp holder. Earth terminal - threaded skirt with 48mm diameter shade ring - Ceramic interior - Brass plunger contacts. This solid brass es e27 27mm edison screw cap lamp holder is intended primarily for attachment to conduit and flat surfaces.
ElekTek - Safety locking screw in base for secure fitting. Safety switch will not operate without a bulb fitted. Solid brass - uk maDE - Premium product. Metal light fittings must be earthed - earth terminals are present.
Sunnylinn - High quality & perfect sizeconstructed of fire-resistant materials. The product size is : High 80mm x Wide 40mm. 10mm thread entryplease check the thread size before ordering.
ElekTek - Please check your thread size before ordering: The female entry thread in the base of this lamp holder is M10 or 10mm. Solid brass - uk maDE - Premium product. Safety locking screw in base for secure fitting. Metal light fittings must be earthed - earth terminals are present. Switch will not operate without a bulb fitted - also ensure both halves of lamp HOLDER ARE SCREWED TOGETHER PROPERLY.
ElekTek - 25mm diameter back plate nipple base plate with 27mm diameter cover and 3 screws. Maximum lamp holder diameter 32mm. B22 22mm bayonet cap with internal earth and locking screw in base. This solid brass b22 bayonet cap lamp holder is intended primarily for attachment to any solid, flat surface that can be drilled. Mounted height 68mm.
ElekTek - Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring - suitable for bulbs up to 200W. Maximum assembled, fitted height 48mm. This 22mm bc bayonet connector lamp holder is intended primarily for attachment to a male 10mm threaded connector. All metal light fittings must be earthed.
